Kia Stinger: Specifications & Consumer information / Tires and wheels

*1: Load Index
*2: Speed Symbol
*3: Normal load : Up to 3 persons
*4: It is applied to Lambda II PE 3.3L T-GDI AWD vehicle.
CAUTION
When replacing tires, use the same size originally supplied with the vehicle.
Using tires of a different size can damage the related parts or make them work irregularly.
✽ NOTICE
- It is permissible to add 21 kPa (3 psi) to the standard tire pressure
specification if colder temperatures are expected soon. Tires typically loose
7 kPa (1 psi) for every -11°C (12°F) temperature drop. If extreme temperature
variations are expected, re-check your tire pressure as necessary to keep them
properly inflated.
- We recommend that when replacing tires, use the same originally supplied
with the vehicles. If not, that affects driving performance.
- When driving in high altitude grades, it is natural for the atmospheric
pressure to decrease. Therefore, please check the tire pressure and add more
air when necessary. Additionally required tire air pressure per km above sea
level: 10.5 kPa (1.5 psi)/km
- Speeds above 160 km/h (100 mph) In order to drive at maximum speeds in
excess of 160 km/h (100 mph), please observe, and, if necessary, adjust tire
pressures for speeds exceeding 160 km/h (100 mph) from the above table. Otherwise
tire damage and accidents could occur.
Dimensions
Engine
Bulb wattage
...
Gross vehicle weight
Luggage volume
Air conditioning system
We recommend that you contact an authorized Kia dealer for more details. ...
Other information:
Launch Control Operation
When using Launch Control, a driver should always make sure that the engine’s
cooling water is warmed up and reaches a recommended temperature.
To operate ESC Off state 2, Press and hold ESC button for more than 3 seconds
in Sports mode. (Status Display on Clus ...
Repair procedures
Inspection
[Theta-II 2.0 T-GDI
/ Lambda-II 3.3 T-GDI]
Engine Oil Level
Be sure that the vehicle is on level ground.
1.
Warm up and stop the engine, and then wait for 5 mi ...