Kia Stinger: Automatic transmission (shift-by-wire) / Parking
Always come to a complete stop and continue to depress the brake pedal. Move
the shift lever into the P (Park) position, apply the parking brake, and place the
engine start/stop button in the OFF position. Take the Key with you when exiting
the vehicle.
WARNING
- Do not depress the accelerator pedal while sitting in the vehicle with
the engine running. Depressing the accelerator pedal for a long period of time
may cause the engine or exhaust system to overheat and start a fire.
- The exhaust gas and the exhaust system are very hot . Keep away from
the exhaust system components. Do not stop or park over flammable materials,
such as dry grass, paper or leaves. They may ignite and cause a fire.
The automatic transmission has 8 forward speeds and one reverse speed.
The individual speeds are selected automatically in the D (Drive) position.
WARNING
To reduce the risk of serious injury or de ...
Shifter Malfunction
The warning message appears on the LCD display, when the transmission or the
shift lever does not properly operate in the P (Park) position. In this case, we
recommend you t ...
Other information:
Description and operation
Description
The heater unit consists of mode control actuator and temperature control actuator.
Located in the heater unit, the temperature control actuator regulates the temperature
in the following procedures.
Signal from control unit adjusts the posi ...
General information
Lift And Support Points
When heavy rear components such as suspension, fuel tank, spare tire,
tailgate and trunk lid are to be removed, place additional weight in the
luggage area before h ...