Kia Stinger: Driving your vehicle / Automatic transmission (shift-by-wire)

When you move the shift lever (1), depress the brake pedal while pressing the
UNLOCK button (2).
To shift the gear to P (Park), press the [P] button(3).
Launch Control Operation
When using Launch Control, a driver should always make sure that the engine’s
cooling water is warmed up and reaches a recommended temperature.
To operate ESC Off s ...
The automatic transmission has 8 forward speeds and one reverse speed.
The individual speeds are selected automatically in the D (Drive) position.
WARNING
To reduce the risk of serious injury or de ...
Other information:
Repair procedures
Inspection
Check the brake fluid level in the brake fluid reservoir. The level should be
between “MIN” and “MAX” marks on the side of the reservoir.
Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification.
Check the brake system fo ...
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine will probably be too hot. If this happens,
you should:
1.Pull off the road and stop as soon as it is safe to do so.
2.Place the shift lever in P and set the parking bra ...