Kia Stinger: ISG (Idle Stop and Go) system / Condition of ISG system operation
The ISG system will operate under the following condition:
- The driver’s seat belt is fastened.
- The driver’s door and engine hood are closed.
- The brake vacuum pressure is adequate.
- The battery is sufficiently charged.
- The outside temperature is between 14°F to 95°F (-10°C to 35°C).
- The engine coolant temperature is not too low.
✽ NOTICE
- If the ISG system does not meet the operation condition, the ISG system
is deactivated. The light on the ISG OFF button will illuminate and a message
“Auto Stop conditions not met” will appear on the LCD display.
- If the light or notice comes on continuously, please check the operation
condition.
To restart the engine from idle stop mode
Release the brake pedal. or
Move the shift gear to the R (Reverse) position or the manual mode while
depressing the brake pedal.
The engine will ...
If you wish to deactivate the ISG system, press the ISG OFF button (1).
The light on the ISG OFF button will illuminate.
If you press the ISG OFF button again, the system will be activated a ...
Other information:
Components and components location
Component
1. Drain plug
2. Differential case
3. Differential cover
4. Pinion drive gear
5. Pinion drive gear adjustment shim
6. Pinion rear bearing
7. Pinion bearing spacer
8. Pinion front bearing
9. Pi ...
Repair procedures
Removal
1.
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
2.
Remove the rear-left wheel & tire and wheel house cover.
3.
Disconnect the vent hose quick-con ...