Kia Stinger CK: Lane Keeping Assist (LKA) system / LKA system Function Change

Kia Stinger (CK) 2018-2023 Owner's Manual / Driving your vehicle / Lane Keeping Assist (LKA) system / LKA system Function Change

Contents:

Lane Departure
Standard LKA
Active LKA

The driver can change LKA to Lane Departure Warning System (LDW system) or change the LKA system mode between Standard LKA and Active LKA from the User Settings Mode on the LCD display.

The driver can choose them by placing the ignition switch to the ON position and by selecting ‘User Settings’, ‘Driver Assistance’, and ‘Lane Keeping Assist’.

The system is automatically set to Standard LKA.

Lane Departure

LDW alerts the driver with a visual and acoustic warning when the system detects the vehicle leaving the lane. In this mode, the system will not provide steering inputs. When the vehicle’s front wheel contacts the inside edge of lane line, LKA system issues the lane departure warning.

Standard LKA

The Standard LKA mode guides the driver to keep the vehicle within the lanes. It provides inputs to the steering when the vehicle is about to deviate from the lanes.

Active LKA

The active inputs to the LKA mode provides more frequent steering in comparison with the Standard LKA mode.

LKA system malfunction

Blind-spot Collision Warning (BCW)

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Cylinder Head

Repair procedures Removal In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair work right after engine stops. • Use fender covers to avoid damaging painted surfaces.

Kia Stinger (CK) 2018-2023 Owner's Manual: Rear Glass Defogger Switch

Repair procedures Inspection 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS). The diagnostic system (KDS) provides the following information. (1) Self diagnosis : Checking failure and code number (DTC) (2) Current data : Checking the system input/output data state (3) Actuation test : Checking the system operation condition (4) Additional function : Controlling other features including system option setting and zero point adjustment 2.