Kia Stinger CK: ISG (Idle Stop and Go) system / Auto start

Kia Stinger (CK) 2018-2023 Owner's Manual / Driving your vehicle / ISG (Idle Stop and Go) system / Auto start

Contents:

To restart the engine from idle stop mode
The engine will also restart automatically without any driver actions if the following occurs:

To restart the engine from idle stop mode

Release the brake pedal. or
Move the shift gear to the R (Reverse) position or the manual mode while depressing the brake pedal.

The engine will start and the green AUTO STOP indicator ( ) on the instrument cluster will go out.

The engine will also restart automatically without any driver actions if the following occurs:

- The fan speed of manual climate control system is set above the 3rd position when the air conditioning is on.
- The fan speed of automatic climate control system is set above the 6th position when the air conditioning is on.
- When a certain amount of time has passed with the climate control system on.
- When the defroster is on.
- The brake vacuum pressure is low.
- The battery charging status is low.
- The vehicle speed exceeds 1 km/h (1 mph).
- Engine is turned off by Auto Stop for a long time.
- If you unfasten the seat belt or open the driver's door while depressing the brake pedal.

Auto stop

ISG system malfunction

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Compass function

The Compass can be turned ON and OFF and will remember the last state when the ignition is cycled. To turn the display feature ON/OFF: 1. Press and release the button to turn the display feature OFF. 2. Press and release the button again to turn the display back ON. Additional options can be set with press and hold sequences of the button and are detailed below.

Kia Stinger (CK) 2018-2023 Owner's Manual: Headlamp (Low/High beam) bulb replacement (Headlamp Type A)

■ Head lamp - Type A 1. Remove the service cover clip on the wheel housing. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connector. 4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly.