Kia Stinger CK: ISG (Idle Stop and Go) system / Auto stop

Contents:

To stop the engine in idle stop mode

Stop the vehicle completely by pressing the brake pedal when the shift lever is in the D (Drive) or N (Neutral) position.

The engine will stop and the green AUTO STOP( ) indicator on the instrument cluster will illuminate.

✽ NOTICE

If you open the engine hood in auto stop mode, the following will happen:

  • The ISG system will deactivate (the light on the ISG OFF button will illuminate).
  • A message will appear on the LCD display.

  • If you move the transmission lever from N to D (manual mode) or R without depressing the brake pedal after stopping engine automatically, the engine does not restart automatically and a warning chime alarms. When this happens, press the brake pedal for auto start.

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Recognizing pedestrians

The sensor may be limited when: - The pedestrian is not fully detected by the camera recognition system, for example, if the pedestrian is leaning over or is not fully walking upright - The pedestrian is moving very quickly or appears abruptly in the camera detection area - The pedestrian is wearing clothing that easily blends into the background, making it difficult to be detected by the camera recognition system - The outside lighting is too bright (e.

Kia Stinger (CK) 2018-2023 Owner's Manual: Blind-Spot Collision Warning (BCW) Warning Lamp

Components and components location Components 1. Side repeater lamp 2. BCW Indicator 3. AVM Camera 4. Puddle lamp Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove mirror (A) to the direction as shown in the picture using (-) screw driver.

Categories

 
Copyright © 2026 www.kstinger.com 0.0131