Kia Stinger CK: Lighting / Headlight leveling device
Kia Stinger (CK) 2018-2023 Owner's Manual / Features of your vehicle / Lighting / Headlight leveling device
Contents:
Automatic type
To ensure the proper headlight beam is used under various conditions, the headlight beam levels are automatically adjusted depending on the number of passengers, the weight in the liftgate, and other driving conditions.
✽ NOTICE
If it does not work properly even though your car is inclined backward according to passenger's posture, or the headlight beam is irradiated to the high or low position, have the system be inspected by an authorized Kia dealer. Do not attempt to inspect or replace the wiring yourself.
Other information:
Kia Stinger (CK) 2018-2023 Owner's Manual: Crankcase Emission Control System
Schematic diagrams Schematic Diagram Repair procedures Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt.Kia Stinger (CK) 2018-2023 Owner's Manual: Rear Bumper Beam Assembly
Components and components location Component Location 1. Rear bumper beam assembly Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Contents
Copyright © 2026 www.kstinger.com 0.0058