Kia Stinger CK: Power Train / Drive Belt

Repair procedures
Inspection
1.

Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.

  
•

Do not bend, twist or turn the drive belt inside out.

•

Do not allow the drive belt to come into contact with oil, water and steam.

2.

Visually check the belt for excessive wear, frayed cords etc.

If any defect has been found, replace the drive belt.

  

Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced.

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Sunvisor

Components and components location Component Location 1. Sunvisor 2. Repair procedures Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Kia Stinger (CK) 2018-2023 Service Manual: Blower Motor

Repair procedures Inspection 1. Connect the battery voltage and check for blower motor operation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation. 3. Replace the blower motor if it is proved that there is a problem with it.

Categories

 
Copyright © 2026 www.kstinger.com 0.0111