Contents:
1.Set the mode to the
position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired speed.
1.Set the mode to the
position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired speed.
5.If dehumidified heating is desired, turn the air conditioning system (if equipped) on.
• If the windshield fogs up, set the mode to the
or
position.
Operation Tips
Kia Stinger (CK) 2018-2023 Owner's Manual: Ignition System
Description and operation Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module). The engine operating conditions (speed, load, warm-up condition, etc.Kia Stinger (CK) 2018-2023 Owner's Manual: Electronic Oil Pump (EOP)
Components and components location Components Location 1. Electric Oil Pump (EOP) Schematic diagrams Circuit Diagram Repair procedures Removal 1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2.