Kia Stinger CK: Manual heating and air conditioning / Temperature control

Kia Stinger (CK) 2018-2025 Owner's Manual / Features of your vehicle / Automatic climate control system / Manual heating and air conditioning / Temperature control

• Front seat

The temperature will increase to the maximum (HI) by turning the knob to the extreme right.

The temperature will decrease to the minimum (Lo) by turning the knob to the extreme left.

When turning the knob, the temperature will increase or decrease by 0.5°C/1°F. When set to the lowest temperature setting, the air conditioning will operate continuously.

• Rear seat

Turn the rear seat temperature control knob to adjust temperature.

The front and rear seat side temperature is adjusted individually.

Adjusting the driver and passenger side temperature equally

  • Press the “SYNC” button to adjust the driver and passenger side temperature equally. The passenger side temperature will be set to the same temperature as the driver side temperature.
  • Turn the driver side temperature control knob. The driver and passenger side temperature will be adjusted equally.

Adjusting the driver and passenger side temperature individually

  • Press the “SYNC” button again to adjust the driver and passenger side temperature individually. The illumination of button turns off.
  • Operate the driver side temperature control knob to adjust the driver side temperature.
  • Operate the passenger side temperature control knob to adjust the passenger side temperature.

Temperature conversion

You can switch the temperature mode from Centigrade to Fahrenheit as follows:

While pressing the OFF button, press the AUTO button for 3 seconds or more.

The display will change from Centigrade to Fahrenheit, or from Fahrenheit to Centigrade.

If the battery has been discharged or disconnected, the temperature mode display will reset to Fahrenheit.

Other information:

Kia Stinger (CK) 2018-2025 Owner's Manual: Engine oil

Checking the engine oil level ■ THETA II 2.0L T-GDI Engine (Gasoline) ■ Lambda II PE 3.3L T-GDI Engine (Gasoline) 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan.

Kia Stinger (CK) 2018-2025 Owner's Manual: Lane Keeping Assist (LKA) system

The Lane Keeping Assist (LKA) system is designed to detect the lane markers on the road with a front view camera at the front windshield, and assists the driver's steering to help keep the vehicle in the lanes. When the system detects the vehicle straying from its lane, it alerts the driver with a visual and audible warning, while applying a slight countersteering torque, trying to prevent the vehicle from moving out of its lane.

 
Copyright © 2025