Kia Stinger CK: Lane Keeping Assist (LKA) system / LKA system Function Change
Contents:
The driver can change LKA to Lane Departure Warning System (LDW system) or change the LKA system mode between Standard LKA and Active LKA from the User Settings Mode on the LCD display.
The driver can choose them by placing the ignition switch to the ON position and by selecting ‘User Settings’, ‘Driver Assistance’, and ‘Lane Keeping Assist’.
The system is automatically set to Standard LKA.
Lane Departure
LDW alerts the driver with a visual and acoustic warning when the system detects the vehicle leaving the lane. In this mode, the system will not provide steering inputs. When the vehicle’s front wheel contacts the inside edge of lane line, LKA system issues the lane departure warning.
Standard LKA
The Standard LKA mode guides the driver to keep the vehicle within the lanes. It provides inputs to the steering when the vehicle is about to deviate from the lanes.
Active LKA
The active inputs to the LKA mode provides more frequent steering in comparison with the Standard LKA mode.
Other information:
Kia Stinger (CK) 2018-2023 Owner's Manual: Rail Pressure Sensor (RPS)
Specifications Specification Pressure Output Voltage (V) [Vref=5V] bar [MPa (kgf/cm², psi)] 0 0 (0, 0) 0.5 140 14 (142, 2031) 2.5 280 28 (286, 4061) 4.5 Description and operation Description Installed on the delivery pipe, the Rail Pressure Sensor (RPS) measures the instantaneous fuel pressure in the delivery pipe.Kia Stinger (CK) 2018-2023 Owner's Manual: Driver’s attention
The driver must be cautious in the following situations because the system is limited when recognition of the lane marker is poor or limited: ►When lane and road condition is poor - It is difficult to distinguish the lane marker from road when the lane marker is covered with dust or sand. - It is difficult to distinguish the color of the lane marker from road.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Contents
