Contents:

WARNING - Exhaust fumes
The liftgate should always be kept completely closed while the vehicle is in motion. If it is left open or ajar, exhaust gases may enter the car and serious illness or death may result.
WARNING
The liftgate swings upward. Make sure no objects or people are near the rear of the vehicle when opening the liftgate.
✽ NOTICE
In cold and wet climates, liftgate lock and liftgate mechanisms may not work properly due to freezing conditions.

Lower and push down the liftgate firmly. Make sure that the liftgate is securely latched.
CAUTION
Make certain that you close the liftgate before driving your vehicle. Possible damage may occur to the liftgate lift cylinders and attached hardware if the liftgate is not closed prior to driving.
WARNING
Make sure your hands, feet and other parts of your body are safely out of the way before closing the liftgate.
CAUTION
Make sure nothing is near the liftgate latch and striker while closing the liftgate. It may damage the liftgate's latch.
WARNING - Exhaust fumes
If you drive with the liftgate open, you will draw dangerous exhaust fumes into your vehicle which can cause serious injury or death to vehicle occupants. If you must drive with the liftgate open, keep the air vents and all windows open so that additional outside air comes into the vehicle.
WARNING - Riding in cargo area
Occupants should never ride in the rear cargo area where no restraints are available.To avoid injury in the event of an accident or sudden stops, occupants should always be properly restrained.
Kia Stinger (CK) 2018-2023 Owner's Manual: Forward Collision-avoidance Assist (FCA)
The FCA system (if equipped) is designed to detect and monitor a vehicle ahead or detect a pedestrian in the roadway through radar signals and camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking. WARNING - Forward Collision-Avoidance assist (FCA) Limitations The FCA system is a supplemental system and is not a substitute for safe driving practices.1. Park on a level surface and apply the parking brake firmly. 2. Place the transaxle shift lever in P (Park). 3. Activate the hazard warning flashers. 4. Remove the wheel lug nut wrench, jack and spare tire from the vehicle. 5. Block both the front and rear of the wheel that is diagonally opposite from the jack position. WARNING - Jack location To reduce the possibility of injury, be sure to use only the jack provided with the vehicle in the correct jack position; never use any other part of the vehicle for jack support.