Contents:

WARNING
Do not pull the inner door handle while the vehicle is moving.
If a power door lock ever fails to function while you are in the vehicle, try one or more of the following techniques to exit :

■ Driver side

■ Passenger side
Operate by pressing the central door lock switch.
For Driver’s door:
For Front Passenger’s door:
WARNING - Doors
The doors should always be fully closed and locked while the vehicle is in motion to prevent accidental opening of the door.
WARNING - Unattended children/animals
Never leave children or animals unattended in your vehicle. An enclosed vehicle can become extremely hot, causing death or severe injury to unattended children or animals who cannot escape the vehicle.
Kia Stinger (CK) 2018-2023 Owner's Manual: Rear Bumper Beam Assembly
Components and components location Component Location 1. Rear bumper beam assembly Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.Kia Stinger (CK) 2018-2023 Owner's Manual: Rear Wheel Speed Sensor
Repair procedures Removal [NON ECS] 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque : 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) Be careful not to damage the hub bolts when removing the wheel and tire.