Kia Stinger CK: Automatic Transmission System / Specifications
Kia Stinger (CK) 2018-2023 Service Manual / Automatic Transmission System / Specifications
Service data
| Service data |
Automatic Transmission
|
Item |
Specification |
|
|
Transmission model |
A8LR1-1 |
|
|
Drive type |
2WD / AWD |
|
|
Engine |
THETA ll 2.0 T-GDI (Gasoline) |
|
|
Clutch type |
Torque converter |
|
|
Oil pump type |
Internal gear |
|
|
Shift Lever type |
*SBW / *SBC |
|
|
Component elements |
Oil filter |
1 unit |
|
Clutch |
4 units |
|
|
Brake |
2 units |
|
|
Planetary gear |
3 units |
|
|
Solenoid valve |
SBW : 11 units (Direct control *VFS : 6 units , Indirect control VFS : 2
units, ON/OFF : 3 units) |
|
|
SBC : 9 units (Direct control *VFS : 6 units , Indirect control VFS : 2
units, ON/OFF : 1 unit) |
||
|
Gear ratio |
1st |
3.665 |
|
2nd |
2.396 |
|
|
3rd |
1.610 |
|
|
4th |
1.190 |
|
|
5th |
1.000 |
|
|
6th |
0.826 |
|
|
7th |
0.643 |
|
|
8th |
0.556 |
|
|
Reverse |
2.273 |
|
|
Final gear ratio |
3.538 |
|
* VFS : Variable Force Solenoid
* SBW : Shift By Wire
* SBC : Shift By Cable
Parking Switch (SBW)
|
Item |
Specification |
|
Output type |
PWM (S1, S2), ON/OFF (Ps, Ns) |
|
Power supply (V) |
5 (S1, S2), 12 (Ps, Ns) |
Inhibitor Switch (SBC)
|
Item |
Specification |
|
Output type |
PWM |
|
Power supply (V) |
5 |
Sensors
|
Item |
Specification |
|
|
Oil temperature sensor |
Type |
*NTC thermistor |
|
Temp.[(°C)°F] / Resistance (kΩ) |
(-40)-40 / 139.5 |
|
|
(-20)-4 / 47.4 |
||
|
(0)32 / 18.6 |
||
|
(20)68 / 8.1 |
||
|
(40)104 / 3.8 |
||
|
(60)140 / 1.98 |
||
|
(80)176 / 1.08 |
||
|
(100)212 / 0.63 |
||
|
(120)248 / 0.38 |
||
|
(140)284 / 0.25 |
||
|
(150)302 / 0.16 |
||
|
Speed sensor (input, output) |
Type |
Hall effect sensor |
|
Operating condition (°C)°F |
(-40 to 150)-40 to 302 |
|
|
Output voltage (V) |
High : 1.4 |
|
|
Low : 0.7 |
||
*NTC: Negative Temperature Coefficient
Solenoid Valves
|
Item |
Specification |
||
|
Direct control VFS |
8LR/B_VFS |
Control type |
N/L (Normal Low) |
|
Control pressure kpa (kgf/cm², psi) |
0 - 1,569.06 (0 - 16, 0 - 227.57) |
||
|
Current (mA) |
0 - 1,100 |
||
|
Coil resistance (Ω) |
5.3 ± 0.3 |
||
|
6/C_VFS |
Control type |
N/L (Normal Low) |
|
|
Control pressure kpa (kgf/cm², psi) |
0 - 1,569.06 (0 - 16, 0 - 227.57) |
||
|
Current (mA) |
0 - 1,100 |
||
|
Coil resistance (Ω) |
5.3 ± 0.3 |
||
|
27/B_VFS |
Control type |
N/L (Normal Low) |
|
|
Control pressure kpa (kgf/cm², psi) |
0 - 1,569.06 (0 - 16, 0 - 227.57) |
||
|
Current (mA) |
0 - 1,100 |
||
|
Coil resistance (Ω) |
5.3 ± 0.3 |
||
|
UD/C_VFS |
Control type |
N/L (Normal Low) |
|
|
Control pressure kpa (kgf/cm², psi) |
0 - 1,569.06 (0 - 16, 0 - 227.57) |
||
|
Current (mA) |
0 - 1,100 |
||
|
Coil resistance (Ω) |
5.3 ± 0.3 |
||
|
35R/C_VFS |
Control type |
N/H (Normal High) |
|
|
Control pressure kpa (kgf/cm², psi) |
0 - 1,569.06 (0 - 16, 0 - 227.57) |
||
|
Current (mA) |
0 - 1,100 |
||
|
Coil resistance (Ω) |
5.3 ± 0.3 |
||
|
4&OD/C_VFS |
Control type |
N/H (Normal High) |
|
|
Control pressure kpa (kgf/cm², psi) |
0 - 1,569.06 (0 - 16, 0 - 227.57) |
||
|
Current (mA) |
0 - 1,100 |
||
|
Coil resistance (Ω) |
5.3 ± 0.3 |
||
|
Indirect control VFS |
LINE_VFS |
Control type |
N/L (Normal Low) |
|
Control pressure kpa (kgf/cm², psi) |
0 - 519.75 (0 - 5.3, 0 - 75.38) |
||
|
Current (mA) |
0 - 850 |
||
|
Coil resistance (Ω) |
5.1 ± 0.3 |
||
|
D/C_VFS |
Control type |
N/L (Normal Low) |
|
|
Control pressure kpa (kgf/cm², psi) |
0 - 519.75 (0 - 5.3, 0 - 75.38) |
||
|
Current (mA) |
0 - 850 |
||
|
Coil resistance (Ω) |
5.1 ± 0.3 |
||
|
ON/OFF |
P position_ON/OFF (SBW) |
Control type |
ON/OFF |
|
Control pressure kpa (kgf/cm², psi) |
539.36 (5.5, 78.23) |
||
|
Current (mA) |
0 - 600 |
||
|
Coil resistance (Ω) |
10.5 ± 0.5 |
||
|
D position_ON/OFF (SBW) |
Control type |
ON/OFF |
|
|
Control pressure kpa (kgf/cm², psi) |
539.36 (5.5, 78.23) |
||
|
Current (mA) |
0 - 600 |
||
|
Coil resistance (Ω) |
10.5 ± 0.5 |
||
|
R position_ON/OFF (SBW) |
Control type |
ON/OFF |
|
|
Control pressure kpa (kgf/cm², psi) |
539.36 (5.5, 78.23) |
||
|
Current (mA) |
0 - 600 |
||
|
Coil resistance (Ω) |
10.5 ± 0.5 |
||
|
SS-A (SBC) |
Control type |
ON/OFF |
|
|
Control pressure kpa (kgf/cm², psi) |
539.36 (5.5, 78.23) |
||
|
Current (mA) |
0 - 600 |
||
|
Coil resistance (Ω) |
10.5 ± 0.5 |
||
8LR/B_VFS : 8LR brake control solenoid valve
6/C_VFS : 6 clutch control solenoid valve
27/B_VFS : 27 brake control solenoid valve
UD/C_VFS : Underdrive clutch control solenoid valve
35R/C_VFS : 35R clutch control solenoid valve
4&OD/C_VFS : 4&Overdrive clutch control solenoid valve
LINE_VFS : Line pressure control solenoid valve
D/C_VFS : Damper clutch control solenoid valve
Solenoid Valve Operation Table
|
|
UD/C |
4&OD/C |
35R/C |
27/B |
8LR/B |
6/C |
ON/OFF |
ON/OFF |
ON/OFF |
|
(P) |
(D) |
(R) |
|||||||
|
P |
|
● |
|
|
|
|
|
● |
|
|
N |
|
● |
● |
|
● |
|
● |
|
|
|
1 |
● |
● |
● |
|
|
|
● |
|
|
|
2 |
● |
● |
● |
● |
|
|
● |
|
|
|
3 |
● |
● |
|
|
|
|
● |
|
|
|
4 |
● |
|
● |
|
|
|
● |
|
|
|
5 |
|
|
|
|
|
|
● |
|
|
|
6 |
|
|
● |
|
|
● |
● |
|
|
|
7 |
|
|
● |
● |
|
|
● |
|
|
|
8 |
|
|
● |
|
● |
|
● |
|
|
|
REV |
|
● |
|
|
● |
|
● |
● |
● |
Clutch & Brake Operation Table
|
|
UD/C |
4&OD/C |
35R/C |
27/B |
8LR/B |
6/C |
|
P |
|
|
|
|
|
|
|
N |
|
|
|
|
● |
|
|
1 |
● |
|
|
|
● |
|
|
2 |
● |
|
|
● |
|
|
|
3 |
● |
|
● |
|
|
|
|
4 |
● |
● |
|
|
|
|
|
5 |
|
● |
● |
|
|
|
|
6 |
|
● |
|
|
|
● |
|
7 |
|
● |
|
● |
|
|
|
8 |
|
● |
|
|
● |
|
|
REV |
|
|
● |
|
● |
|
Tightening torque
| Tightening Torques |
|
Item |
N·m |
kgf·m |
lb·ft |
|
TCM mounting nut |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
|
E-Shifter mounting bolt |
8.8 - 13.7 |
0.9 - 1.4 |
6.5 - 10.1 |
|
Shift lever mounting bolt |
8.8 - 13.7 |
0.9 - 1.4 |
6.5 - 10.1 |
|
Shift cable mounting screw |
0.69 - 1.37 |
0.07 - 0.14 |
0.51 - 1.01 |
|
Parking release actuator mounting bolt |
9.8 - 14.7 |
1.0 - 1.5 |
7.2 - 10.8 |
|
Inhibitor switch / Parking switch mounting bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
|
Manual control lever / Parking release lever mounting nut |
13.7 - 17.7 |
1.4 - 1.8 |
10.1 - 13.0 |
|
Torque converter mounting bolt |
45.1 - 52.0 |
4.6 - 5.3 |
33.3 - 38.3 |
|
Transmission mounting bolt |
42.2 - 53.9 |
4.3 - 5.5 |
31.1 - 39.8 |
|
34.3 - 46.1 |
3.5 - 4.7 |
25.3 - 34.0 |
|
|
39.2 - 46.1 |
4.0 - 4.7 |
28.9 - 34.0 |
|
|
Starter mounting bolt |
49.0 - 63.7 |
5.0 - 6.5 |
36.2 - 47.0 |
|
Cross member mounting bolt |
58.8 - 73.5 |
6.0 - 7.5 |
43.4 - 54.2 |
|
Cross member mounting nut (2WD) |
29.4 - 34.3 |
3.0 - 3.5 |
21.7 - 25.3 |
|
Cross member mounting nut (4WD) |
63.7 - 83.4 |
6.5 - 8.5 |
47.0 - 61.5 |
|
Parking release cable mounting bolt |
12.7 - 15.7 |
1.3 - 1.6 |
9.4 - 11.6 |
|
Shift cable mounting nut |
9.8 - 14.7 |
1.0 - 1.5 |
7.2 - 10.8 |
|
ATF drain plug |
22.6 - 24.5 |
2.3 - 2.5 |
16.6 - 18.1 |
|
ATF level plug |
22.6 - 24.5 |
2.3 - 2.5 |
16.6 - 18.1 |
|
ATF Injection plug |
34.3 - 44.1 |
3.4 - 4.5 |
25.3 - 32.5 |
|
Valve body cover mounting bolt |
13.7 - 15.7 |
1.4 - 1.6 |
10.1 - 11.6 |
|
Valve body mounting bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
|
E-Module mounting bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
|
Indirect control solenoid valve support bracket mounting bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
|
Direct control solenoid valve support bracket mounting bolt |
11.8 - 13.7 |
1.2 - 1.4 |
8.7 - 10.1 |
|
EOP mounting bolt |
19.6 - 25.5 |
2.0 - 2.6 |
14.5 - 18.8 |
|
OPU mounting nut |
19.6 - 25.5 |
2.0 - 2.6 |
14.5 - 18.8 |
|
ATF warmer mounting bolt |
9.8 - 11.8 |
1.0 - 1.2 |
7.2 - 8.7 |
Lubricant
| Lubricant |
|
Item |
Recommended |
Capacity |
|
ATF |
- ATF SP-IV-RR • Recommended transmission fluid : GS CALTEX ATF SP-IV-RR, Kia Genuine ATF SP-IV-RR |
9.2 L (2.43 U.S gal., 9.72 U.S.qt., 8.10 Imp.qt.) |
Other information:
Kia Stinger (CK) 2018-2023 Service Manual: Front Seat Inner Shield Cover
Components and components location Component Location 1. Front Seat Inner Shield Cover Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.Components and components location Component Location 1. Rear door module Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.Categories
Copyright © 2025