
When the “Check System” warning message appears, the system is not working properly. In this case, have the vehicle inspected by an authorized Kia dealer.
WARNING
✽ NOTICE
The Driver Attention Warning system utilizes the camera sensor on the front windshield for its operation. To keep the camera sensor in the best condition, you should observe the followings:
- Do not disassemble camera temporarily for tinted window or attaching any
types of coatings and accessories. If you disassemble a camera and assemble it again,
take your vehicle to an authorized Kia dealer and have the system checked to need
a calibration.
- Do not locate any reflective objects (i.e. white paper, mirror) over the dashboard.
Any light reflection may prevent the Driver Attention Warning (DAW) system from
functioning.
- Pay extreme caution to keep the camera sensor out of water.
- Do not disassemble the camera assembly or apply any impact on the camera assembly.
• Playing the vehicle audio system at high volume may offset the Driver Attention
Warning system warning sounds
✽ NOTICE
The Driver Attention Warning system may not provide alerts in the following situations:
✽ NOTICE
The Driver Attention Warning (DAW) system does not detect actual driver fatigue or drowsiness. The system monitors driving and provides a warning if it detects inattentive driving practices.
Kia Stinger (CK) 2018-2023 Owner's Manual: Front Driveshaft
Components and components location Components 1. Front drive shaft [LH] 2. Front drive shaft bracket 3. Front drive shaft [RH] Repair procedures Removal [3.3 T-GDI LAMBDA II (LH)] 1. Remove wheel nuts, front wheel and tire (A) from front hub. Tightening torque: 107.Kia Stinger (CK) 2018-2023 Owner's Manual: Rear Driveshaft Assembly
Repair procedures Removal 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) Be careful not to damage the wheel nuts when removing the wheel and tire (A).