Kia Stinger CK: Special driving conditions / Highway driving

Kia Stinger (CK) 2018-2023 Owner's Manual / Driving your vehicle / Special driving conditions / Highway driving

Contents:

Tires
Fuel, engine coolant and engine oil
Drive belt

Tires

Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires.

Avoid using worn or damaged tires which may result in reduced traction or tire failure.

Never exceed the maximum tire inflation pressure shown on the tires.

WARNING - Under/over inflated tires

Always check the tires for proper inflation before driving. Underinflated or overinflated tires can cause poor handling, loss of vehicle control, and sudden tire failure leading to accidents, injuries, and even death. For proper tire pressures, refer to “Tires and wheels” in chapter 8.

WARNING - Tire tread

Always check the tire tread before driving your vehicle. Worn-out tires can result in loss of vehicle control.Worn-out tires should be replaced as soon as possible. For further information and tread limits, refer to "Tires and wheels" in chapter 7.

Fuel, engine coolant and engine oil

High speed travel consumes more fuel than urban motoring. Do not forget to check both the engine coolant and engine oil.

Drive belt

A loose or damaged drive belt may result in overheating of the engine.

Special driving conditions

Winter driving

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Starting System

Description and operation Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.

Kia Stinger (CK) 2018-2023 Owner's Manual: Shift to P to edit settings

This warning message appears if you try to adjust the User Settings while driving. For your safety, change the User Settings after parking the vehicle, applying the parking brake and pressing the parking “P” button. Head-Up Display (HUD) Enable Head-Up Display : If this item is checked, Head-Up Display will be activated. Display Height : Adjust the height of the HUD image on the windshield glass.