Kia Stinger CK: ISG (Idle Stop and Go) system / Auto start

Kia Stinger (CK) 2018-2023 Owner's Manual / Driving your vehicle / ISG (Idle Stop and Go) system / Auto start

Contents:

To restart the engine from idle stop mode
The engine will also restart automatically without any driver actions if the following occurs:

To restart the engine from idle stop mode

Release the brake pedal. or
Move the shift gear to the R (Reverse) position or the manual mode while depressing the brake pedal.

The engine will start and the green AUTO STOP indicator ( ) on the instrument cluster will go out.

The engine will also restart automatically without any driver actions if the following occurs:

- The fan speed of manual climate control system is set above the 3rd position when the air conditioning is on.
- The fan speed of automatic climate control system is set above the 6th position when the air conditioning is on.
- When a certain amount of time has passed with the climate control system on.
- When the defroster is on.
- The brake vacuum pressure is low.
- The battery charging status is low.
- The vehicle speed exceeds 1 km/h (1 mph).
- Engine is turned off by Auto Stop for a long time.
- If you unfasten the seat belt or open the driver's door while depressing the brake pedal.

Auto stop

ISG system malfunction

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Scheduled maintenance service

Follow the Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow the Maintenance Under Severe Usage Conditions. Repeated driving short distance of less than 8 km (5 miles) in normal temperature or less than 16 km (10 miles) in freezing temperature Extensive engine idling or low speed driving for long distances Driving on rough, dusty, muddy, unpaved, graveled or salt-spread road

Kia Stinger (CK) 2018-2023 Owner's Manual: Auto up/down window (Driver`s and Front Passenger’s side)

Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or raises the window even when the switch is released. To stop the window at the desired position while the window is in operation, pull up or press down and release the switch. If the power window does not operate normally, the automatic power window system must be reset as follows: 1.