Kia Stinger CK: ISG (Idle Stop and Go) system / Auto stop

Contents:

To stop the engine in idle stop mode

Stop the vehicle completely by pressing the brake pedal when the shift lever is in the D (Drive) or N (Neutral) position.

The engine will stop and the green AUTO STOP( ) indicator on the instrument cluster will illuminate.

✽ NOTICE

If you open the engine hood in auto stop mode, the following will happen:

  • The ISG system will deactivate (the light on the ISG OFF button will illuminate).
  • A message will appear on the LCD display.

  • If you move the transmission lever from N to D (manual mode) or R without depressing the brake pedal after stopping engine automatically, the engine does not restart automatically and a warning chime alarms. When this happens, press the brake pedal for auto start.

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Accelerator Position Sensor (APS)

Specifications Specification Accelerator Position Output Voltage (V) [Vref = 5V] APS1 APS2 C.T 0.7 - 0.8 0.33 - 0.43 W.O.T 3.99 - 4.23 1.94 - 2.18 Description and operation Description Installed on the accelerator pedal module, the Accelerator Position Sensor (APS) detects the rotation angle of the accelerator pedal.

Kia Stinger (CK) 2018-2023 Owner's Manual: Front Propeller Shaft

Repair procedures Removal 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the engine room side cover. D 2.2 R VGT (Refer to Engine Mechanical System - "Engine Room Under cover") G 2.0 T-GDI THETA II (Refer to Engine Mechanical System - "Engine Room Under cover") G 3.

Categories

 
Copyright © 2026 www.kstinger.com 0.0108