Contents:

(1) Driver’s door power window switch
(2) Front passenger’s door power window switch
(3) Rear door (left) power window switch
(4) Rear door (right) power window switch
(5) Window opening and closing
(6) Automatic power window up/down (Driver's and Passenger's window)
(7) Power window lock button
In cold and wet climates, power windows may not work properly due to freezing conditions.
The Engine Start/Stop Button must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window. The driver has a power window lock button which can block the operation of rear passenger windows.
The power windows can be operated for approximately 30 seconds after the engine start/stop button is set to the ACC or LOCK position.
However, if the front doors are opened, the power windows cannot be operated even within the 30 seconds period.
The driver’s door has a master power window switch that controls all the windows in the vehicle.
If the window cannot be closed because it is blocked by objects, remove the objects and close the window.
✽ NOTICE
While driving with the rear windows down or with the sunroof (if equipped) in an open (or partially open) position, your vehicle may demonstrate a wind buffeting or pulsation noise. This noise is a normal occurrence and can be reduced or eliminated by taking the following actions. If the noise occurs with one or both of the rear windows down, partially lower both front windows approximately 2.5 cm (1 in.). If you experience the noise with the sunroof open, slightly reduce the size of the sunroof opening.
CAUTION
Do not install any accessories in the vehicle that extend into the open window area. Such objects will impact the proper function of the Automatic reversal “jam protection” feature described in this chapter.
Kia Stinger (CK) 2018-2023 Owner's Manual: Automatic Transmission System
Special service tools Special Service Tools Tool Name / Number Illustration Description Inhibitor switch guide pin (Parking switch guide pin) 09480-D2100 Used for fixing "N" range when installing inhibitor switch (Used for fixing "P" range when installing parking switch) Troubleshooting Troubleshooting Limp Home Mode Features a fail-safe function that prevents dangerous situations in the event of a transmission failure.*1 The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. *2 Do not allow children to ride in the front passenger seat. When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending upon his/her physique or sitting position.