Kia Stinger CK: Lighting / Headlight leveling device

Kia Stinger (CK) 2018-2023 Owner's Manual / Features of your vehicle / Lighting / Headlight leveling device

Contents:

Automatic type

To ensure the proper headlight beam is used under various conditions, the headlight beam levels are automatically adjusted depending on the number of passengers, the weight in the liftgate, and other driving conditions.

✽ NOTICE

If it does not work properly even though your car is inclined backward according to passenger's posture, or the headlight beam is irradiated to the high or low position, have the system be inspected by an authorized Kia dealer. Do not attempt to inspect or replace the wiring yourself.

High Beam Assist

Wipers and washers

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Front Driveshaft

Components and components location Components 1. Front drive shaft [LH] 2. Front drive shaft bracket 3. Front drive shaft [RH] Repair procedures Removal [3.3 T-GDI LAMBDA II (LH)] 1. Remove wheel nuts, front wheel and tire (A) from front hub. Tightening torque: 107.

Kia Stinger (CK) 2018-2023 Owner's Manual: Tire (pressure & tread wear)

Repair procedures Inspection 1. Check the tire pressure. 17(inch) : 245 + 7.0 kPa (36 + 1 psi) 18(inch) : 245 + 7.0 kPa (36 + 1 psi) 19(inch) : 245 + 7.0 kPa (36 + 1 psi) Tire Rotation Checking For Pull And Wander If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure.

Categories

 
Copyright © 2026 www.kstinger.com 0.0087