Contents:
The FCA system (if equipped) is designed to detect and monitor a vehicle ahead or detect a pedestrian in the roadway through radar signals and camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking.
WARNING - Forward Collision-Avoidance assist (FCA) Limitations
The FCA system is a supplemental system and is not a substitute for safe driving practices. It is the responsibility of the driver to always check the speed and distance to the vehicle ahead and to be prepared to apply the brakes.
WARNING
Take the following precautions when using the forward collision- avoidance assist (FCA) system:
The driver should always exercise caution when operating the vehicle, even though there is no warning message or warning alarm.
WARNING
The FCA is a supplemental system and cannot completely stop the vehicle in all situations or avoid all collisions. It is the responsibility of the driver to safely drive and control the vehicle.
WARNING
Never deliberately drive dangerously to activate the system as such conduct increases the risk of an accident.
✽ NOTICE
The FCA system assesses the risk of a collision by monitoring several variables such as the distance to the vehicle/pedestrian ahead, the speed of the vehicle/pedestrian ahead, and the driver's operation of the vehicle. Certain conditions such as inclement weather and road conditions may affect the operation of the FCA system.

)
will illuminate and the warning message will appear for a few seconds. After
the message disappears, the master warning light (
)
will illuminate. In this case, have the vehicle inspected by an authorized Kia
dealer.WARNING
The FCA is only a supplemental system for the driver’s convenience. It is the driver's responsibility to control the vehicle. Do not solely depend on the FCA system. Rather, maintain a safe braking distance, and, if necessary, depress the brake pedal to lower the driving speed.
Kia Stinger (CK) 2018-2023 Owner's Manual: Stop Lamp Switch
Components and components location Components 1. Brake lamp switch 2. Brake pedal Description and operation Operation Operation principle of inductive non-contact switch 1. Use the high frequency magnetic field and the induced current that are generated by oscillation (to approved voltage) of coil in switch.Kia Stinger (CK) 2018-2023 Owner's Manual: Seat Belt Buckle Switch (BS)
Description and operation Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return.