Kia Stinger CK: Maintenance / Light bulbs
Contents:
Bulb replacement precaution ➤
Light bulb position (Front)
■ Head lamp - Type A
■ Head lamp - Type B
(1) Headlamp (Low/High) (bulb type)
(2) Front turn signal lamp (bulb type)
(3) Day time running lamp / Position lamp (LED type)
(4) Side marker (bulb type)
(5) Headlamp (Low/High) (LED type)
(6) Headlamp (Low/High assist) (LED type)
(7) Front turn signal lamp (LED type)
(8) Day time running lamp / Position lamp (LED type)
(9) Side marker (LED type)
Light bulb position (Rear)
■ Rear combination lamp - Type A
■ Rear combination lamp - Type B
■ High mounted stop lamp
■ License plate lamp
(1) Stop and tail lamp (LED type)
(2) Stop lamp (LED type)
(3) Back-up lamp (bulb type)
(4) Rear turn signal lamp (bulb type)
(5) Side marker (LED type)
(6) Rear turn signal lamp (LED type)
(7) High mounted stop lamp (LED type)
(8) License plate lamp (LED type)
Other information:
Kia Stinger (CK) 2018-2023 Owner's Manual: Finish maintenance
Washing To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly and frequently at least once a month with lukewarm or cold water. If you use your vehicle for off-road driving, you should wash it after each off-road trip. Pay special attention to the removal of any accumulation of salt, dirt, mud, and other foreign materials.Kia Stinger (CK) 2018-2023 Owner's Manual: High Mounted Stop Lamp
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate upper trim. (Refer to Body - "Tailgate Trim") 3. Disconnect the high mounted stop lamp connector (A). 4. Remove the high mounted stop lamp (A) after loosening the mounting bolts.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Contents
