Kia Stinger CK: Driveshaft and axle / Differential Carrier Assembly
Kia Stinger (CK) 2018-2023 Service Manual / Driveshaft and axle / Differential Carrier Assembly
Contents:
Rear Differential Carrier
Components and components location
| Component |
| 1. Drain plug 2. Differential case 3. Differential cover 4. Pinion drive gear 5. Pinion drive gear adjustment shim 6. Pinion rear bearing 7. Pinion bearing spacer 8. Pinion front bearing |
9. Pinion oil seal 10. Companion flange 11. Pinion lock nut 12. Differential side bearing 13. Differential side bearing spacer 14. Differential case assembly 15. Air breather 16. Filler plug |
17. Side oil seal 18. Differential case cover bolts 19. Oil guide spacer (RH) 20. Oil guide spacer (LH) 21. LSD 22. Differential case assembly bolts 23. Drive gear |
Front Differential Carrier ➤
Other information:
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control lever located on the overhead console. The sunroof can be operated for approximately 30 seconds after the Engine Start/Stop button is in the OFF position. However, if the driver’s door is opened, the sunroof cannot be operated even within the 30 second period.Opening the hood 1. Pull the release lever to unlatch the hood. The hood should pop open slightly. Only open the hood with the vehicle on a flat surface, engine is turned off, shift lever placed in P (Park) position and setting the parking brake. 2. Go to the front of the vehicle, raise the hood slightly, push the secondary latch (1) left side of the hood center and lift the hood (2).Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Contents
Copyright © 2025 www.kstinger.com 0.0103