Kia Stinger CK: Air Conditioning System / Refrigerant Line

Repair procedures
Replacement
1.

Discharge refrigerant from the refrigeration system.

2.

Replace faulty tube or hose.

  

Cap the open fittings immediately to keep moisture or dirt out of the system.

3.

Tighten the bolt or nut joint to the specified torque.

  

Connections should not be tightened to exceed the specified torque.

4.

Evacuate air in the refrigeration system and charge system with refrigerant.

Specified amount

R-134a : 600 ± 25g (20.0 ± 0.88 oz.)

R-1234yf : 570 ± 25g (22.9 ± 0.88 oz.)

5.

Inspect for leakage of refrigerant.

Using a gas leak detector, check for refrigerant leakage.

6.

Inspect A/C operation.

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Tire replacement

If the tire is worn evenly, a tread wear Indicator (A) will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 inch) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the tire. The ABS (Anti-lock Brake System) works by comparing the speed of the wheels.

Kia Stinger (CK) 2018-2023 Service Manual: Engine Oil and Filter

Repair procedures Inspection [Theta-II 2.0 T-GDI / Lambda-II 3.3 T-GDI] Engine Oil Level    Be sure that the vehicle is on level ground. 1. Warm up and stop the engine, and then wait for 5 minutes. 2. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan.

Categories

 
Copyright © 2026 www.kstinger.com 0.0092