Kia Stinger CK: Emission Control System / Specifications
Kia Stinger (CK) 2018-2023 Service Manual / Emission Control System / Specifications
Service data
| Service Data |
Purge Control Solenoid Valve (PCSV)
▷ Specification
|
Item |
Specification |
|
Coil Resistance (Ω) |
18.5 - 22.5 [20°C(68°F)] |
Tightening torque
| Tightening Torques |
|
Item |
kgf·m |
N·m |
lb·ft |
|
Positive crankcase ventilation valve |
0.2 - 0.3 |
1.96 - 2.94 |
1.45 - 2.17 |
|
Canister mounting bolt |
0.4 - 0.6 |
3.9 - 5.9 |
2.9 - 4.3 |
|
Canister protector mounting bolt |
0.4 - 0.6 |
3.9 - 5.9 |
2.9 - 4.3 |
Other information:
❈ Left side : Normal , Right side : Blown A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 4 (or 5) fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse.Repair procedures Removal 1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Turn the crankshaft pulley and align its groove with the timing mark of the timing chain cover to set the piston of No.1 cylinder to the top dead center on compression stroke.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Copyright © 2026 www.kstinger.com 0.0086