Kia Stinger CK: Lane Keeping Assist (LKA) system / LKA system Function Change

Kia Stinger (CK) 2018-2023 Owner's Manual / Driving your vehicle / Lane Keeping Assist (LKA) system / LKA system Function Change

Contents:

Lane Departure
Standard LKA
Active LKA

The driver can change LKA to Lane Departure Warning System (LDW system) or change the LKA system mode between Standard LKA and Active LKA from the User Settings Mode on the LCD display.

The driver can choose them by placing the ignition switch to the ON position and by selecting ‘User Settings’, ‘Driver Assistance’, and ‘Lane Keeping Assist’.

The system is automatically set to Standard LKA.

Lane Departure

LDW alerts the driver with a visual and acoustic warning when the system detects the vehicle leaving the lane. In this mode, the system will not provide steering inputs. When the vehicle’s front wheel contacts the inside edge of lane line, LKA system issues the lane departure warning.

Standard LKA

The Standard LKA mode guides the driver to keep the vehicle within the lanes. It provides inputs to the steering when the vehicle is about to deviate from the lanes.

Active LKA

The active inputs to the LKA mode provides more frequent steering in comparison with the Standard LKA mode.

LKA system malfunction

Blind-spot Collision Warning (BCW)

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Automatic Transmission Control System

Description and operation Description Automatic transmission control system relies on various measurements to determine the current control status and determine the necessary compensation values. These values are used to control the actuators and achieve the desired control output. Control System Composition Shift By Wire (SBW) System Composition ▶ Operating Principle – Instead of cable, the system uses electronic signals to shift between the P-R-N-D gears.

Kia Stinger (CK) 2018-2023 Owner's Manual: Blind-Spot Collision Warning (BCW) Unit

Components and components location Components Repair procedures Removal lf replacement of the bracket or extension wire of BCW unit is required, it is recommended to surely replace the defective part only with a new one, not the whole BCW unit.