Kia Stinger CK: Smart key / Immobilizer system
Contents:
Your vehicle is equipped with an electronic engine immobilizer system to reduce the risk of unauthorized vehicle use.
Whenever the ENGINE START/STOP button is changed to the ON position, the immobilizer system checks and verifies if the key is valid or not.
If the key is valid, the engine will start.
If the key is invalid, the engine will not start.
✽ NOTICE
In order to prevent theft of your vehicle, do not leave spare keys anywhere in your vehicle. Your Immobilizer password is a customer unique password and should be kept confidential. Do not leave this number anywhere in your vehicle.
To deactivate the immobilizer system
Change the ENGINE START/STOP button to the ON position.
To activate the immobilizer system
Change the ENGINE START/STOP button to the OFF position. The immobilizer system activates automatically. Without a valid smart key for your vehicle, the engine will not start.
In order to prevent theft of your vehicle, do not leave spare keys anywhere in your vehicle.
Your immobilizer password is a customer unique password and should be kept confidential. Do not leave this number anywhere in your vehicle.
✽ NOTICE
Keep each key separate in order to avoid a starting malfunction.
Do not put metal accessories near the smart key.
Metal accessories may interrupt the transponder signal and may prevent the engine from being started.
If you need additional keys or lose your keys, consult an authorized Kia dealer.
CAUTION - Immobilizer damage
Do not expose your immobilizer system to moisture, static electricity or rough handling. This may damage your immobilizer.
CAUTION - Immobilizer alterations
Do not change, alter or adjust the immobilizer system because it could cause the immobilizer system to malfunction.
This device complies with Industry Canada licence-exempt RSS standard( s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
✽ NOTICE
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Other information:
1. Park on a level surface and apply the parking brake firmly. 2. Place the transaxle shift lever in P (Park). 3. Activate the hazard warning flashers. 4. Remove the wheel lug nut wrench, jack and spare tire from the vehicle. 5. Block both the front and rear of the wheel that is diagonally opposite from the jack position. WARNING - Jack location To reduce the possibility of injury, be sure to use only the jack provided with the vehicle in the correct jack position; never use any other part of the vehicle for jack support.Components and components location Components 1. Rear seat cushion pad 2. Rear seat cushion heater 3. Rear seat cushion covering 4. Rear seat back covering 5. Rear seat back pad 6. Rear seat back frame back panel 7. Rear seat back folding knob [LH] 8. Rear seat back folding knob cover [LH] 9.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Contents
