Kia Stinger CK: Transfer Assembly / Transfer Fluid

Kia Stinger (CK) 2018-2023 Service Manual / 4 Wheel Drive (AWD) System / Transfer Assembly / Transfer Fluid

Specifications
Lubricant

Item
Defined lubricant
Capacity
Transfer oil
Exclusive oil for transfer case
ATF SHELL TF0870B
0.820L
(0.217 U.S gal., 0.87 U.S.qt., 0.72 Imp.qt.)

Repair procedures
Inspection
  

Prohibition on checking, refilling and replacing the transfer case oil

–

Do not check, refill and replace the transfer case oil because transfer case (ATF SHELL TF0870B) is filled when coming out of the factory.

–

Do not check and replace the oil.

–

No drain plug.

–

In case that the transfer case (AWD) oil-related failure code (DTC) appears, replace the transfer oil case assembly.

Transfer Case Assembly

Oil Seal

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Engine Mechanical System

Repair procedures Compression Pressure Inspection    If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up and stop engine. Allow the engine to warm up to normal operating temperature.

Kia Stinger (CK) 2018-2023 Service Manual: Rear Pillar Trim

Components and components location Component Location 1. Rear pillar trim Repair procedures Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Categories

 
Copyright © 2026 www.kstinger.com 0.0086