Contents:
1.Set the mode to the
position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired speed.
1.Set the mode to the
position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired speed.
5.If dehumidified heating is desired, turn the air conditioning system (if equipped) on.
• If the windshield fogs up, set the mode to the
or
position.
Operation Tips
Kia Stinger (CK) 2018-2023 Owner's Manual: Seat Ventilation Unit
Components and components location Component Location 1. Seat ventilation blower 2. Seat ventilation unit (Assist seat only) Schematic diagrams Circuit Diagram Repair procedures Removal Seat Ventilation Unit 1. Disconnect the negative (-) battery terminal.Kia Stinger (CK) 2018-2023 Owner's Manual: Console ON/OFF Actuator
Repair procedures Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected to terminal 3 and ground to terminal 7. Verify that the mode control actuator operates to the vent mode when connected in reverse.