Kia Stinger: Light bulb position (Side) / Position lamp + DRL (LED type) bulb replacement (Headlamp Type A)

Kia Stinger CK 2018-2025 Owners Manual / Maintenance / Light bulb position (Side) / Position lamp + DRL (LED type) bulb replacement (Headlamp Type A)

■ Head lamp - Type A

If the position lamp + DRL (LED) (1) does not operate, have the vehicle checked by an authorized Kia dealer.

The LED lamps cannot be replaced as a single component because they are part of an integrated unit. The LED lamps have to be replaced with the unit.

A skilled technician should check or repair the position lamp + DRL (LED), for it may damage related parts of the vehicle.

Side marker bulb replacement (Headlamp Type A)
■ Head lamp - Type A If the side marker (1) does not operate, have the vehicle checked by an authorized Kia dealer. A skilled technician should check or repair the side marker, for it may dama ...

Headlamp (Low/High beam) bulb replacement (Headlamp Type A)
■ Head lamp - Type A 1. Remove the service cover clip on the wheel housing. 2. Remove the headlamp bulb cover by turning it counterclockwise. 3. Disconnect the headlamp bulb socket-connecto ...

Other information:

Kia Stinger CK 2018-2025 Owners Manual: Launch Control


Launch Control Operation When using Launch Control, a driver should always make sure that the engine’s cooling water is warmed up and reaches a recommended temperature. To operate ESC Off state 2, Press and hold ESC button for more than 3 seconds in Sports mode. (Status Display on Clus ...

Kia Stinger CK 2018-2025 Service Manual: Drive Belt Tensioner


Repair procedures Removal and Installation 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") 2. Remove the drive belt auto tensioner pulley (A). Tightening torque : 53.9 - 63.7 N·m ( ...

Copyright © www.kstinger.com 2015-2025