Kia Stinger CK: Maintenance / Light bulbs
Contents:
Bulb replacement precaution ➤
Light bulb position (Front)
■ Head lamp - Type A
■ Head lamp - Type B
(1) Headlamp (Low/High) (bulb type)
(2) Front turn signal lamp (bulb type)
(3) Day time running lamp / Position lamp (LED type)
(4) Side marker (bulb type)
(5) Headlamp (Low/High) (LED type)
(6) Headlamp (Low/High assist) (LED type)
(7) Front turn signal lamp (LED type)
(8) Day time running lamp / Position lamp (LED type)
(9) Side marker (LED type)
Light bulb position (Rear)
■ Rear combination lamp - Type A
■ Rear combination lamp - Type B
■ High mounted stop lamp
■ License plate lamp
(1) Stop and tail lamp (LED type)
(2) Stop lamp (LED type)
(3) Back-up lamp (bulb type)
(4) Rear turn signal lamp (bulb type)
(5) Side marker (LED type)
(6) Rear turn signal lamp (LED type)
(7) High mounted stop lamp (LED type)
(8) License plate lamp (LED type)
Other information:
Kia Stinger (CK) 2018-2023 Owner's Manual: Driver position memory system
Driver Position Memory System is the facility that enables driver’s seat, leg extension, steering wheel, exterior mirrors, cluster and head-up display (HUD) to be controlled with a simple button operation, which allows a driver to recall memorized driving positions and automatically control them. - Driver’s seat/Leg extension/Steering Wheel/Exterior mirrors: Location - Cluster: Brightness of lighting - Head Up Display (HUD): Height, rotation and brightness.Kia Stinger (CK) 2018-2023 Owner's Manual: Crankcase Emission Control System
Schematic diagrams Schematic Diagram Repair procedures Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Contents
