Kia Stinger CK: Engine Mechanical System / Engine And Transmission Assembly

Kia Stinger (CK) 2018-2023 Service Manual / Engine Mechanical System / Engine And Transmission Assembly

Contents:

Engine Cover

Repair procedures
Removal and Installation
1.

Remove the engine cover (A).

  
•

Lift up the lower end of engine cover, then left and right alternately.

•

When installing, check that the mounting rubber insulators are installed.

2.

Install in the reverse order of removal.

Engine Room Under Cover ➤

Engine Mounting ➤

Engine And Transmission Assembly ➤

Crankshaft Damper Pulley

Engine Room Under Cover

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Parking Brake Assembly

Repair procedures Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the knee airbag. (Refer to Restraint - "Knee airbag (KAB) module") 4.

Kia Stinger (CK) 2018-2023 Service Manual: Passenger Airbag (PAB) Module

Description and operation Description Installed inside the crash pad, the passenger airbag (PAB) protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB.    Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester.

Categories

 
Copyright © 2025 www.kstinger.com 0.0084