Kia Stinger CK: Fuel Delivery System / Fuel Pump Motor

Specifications
Specifications
Fuel pump motor

Item
Specification
Output Voltage (V)
12.6
Low Pressure Fuel Line
bar
3.5 - 6.0
kPa
350 - 600
kgf/cm²
3.5 - 6.1
psi
50.7 - 87.0

Repair procedures
Removal
  

Fuel pump motor cannot be replaced on its own; it should be replaced with the fuel pump assembly.

(Refer to Fuel Delivery System - "Low Pressure Fuel Pump")

Installation
  

Fuel pump motor cannot be replaced on its own; it should be replaced with the fuel pump assembly.

(Refer to Fuel Delivery System - "Low Pressure Fuel Pump")

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Windshield defrosting and defogging

WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection to the position and fan speed control to the lower speed.

Kia Stinger (CK) 2018-2023 Service Manual: Heater Core

Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts and bolts, remove the main crash pad and cowl cross bar assembly altogether. (Refer to Heater - "Heater Unit") 3. Remove the heater core (A). 4.

Categories

 
Copyright © 2026 www.kstinger.com 0.0101