Contents:

With the Engine Start/Stop Button in the ON position, pressing the heated steering wheel button warms the steering wheel. The indicator on the button will illuminate.
To turn the heated steering wheel off, press the button once again. The indicator on the button will turn off.
WARNING
If the steering wheel becomes too warm, turn the system off. The heated steering wheel may cause burns even at low temperatures, especially if used for long periods of time.
✽ NOTICE
The heated steering wheel will turn off automatically approximately 30 minutes after the heated steering wheel is turned on.
CAUTION

To sound the horn, press the horn symbols on your steering wheel. Check the horn regularly to be sure it operates properly.
✽ NOTICE
To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed.
Kia Stinger (CK) 2018-2023 Owner's Manual: Blind-Spot Collision Warning (BCW) Warning Lamp
Components and components location Components 1. Side repeater lamp 2. BCW Indicator 3. AVM Camera 4. Puddle lamp Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove mirror (A) to the direction as shown in the picture using (-) screw driver.Kia Stinger (CK) 2018-2023 Owner's Manual: Camshaft Position Sensor (CMPS)
Specifications Specifications Item Specification Air Cap (mm) 0.2 - 2.0 Description and operation Description Camshaft Position Sensor (CMPS) is a hall sensor, which detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which cannot be detected by the CKPS.