Kia Stinger CK: Driving your vehicle / Automatic transmission (shift-by-wire)

Kia Stinger (CK) 2018-2023 Owner's Manual / Driving your vehicle / Automatic transmission (shift-by-wire)

Contents:

When you move the shift lever (1), depress the brake pedal while pressing the UNLOCK button (2).

To shift the gear to P (Park), press the [P] button(3).

Automatic transmission operation ➤

Parking

Always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, apply the parking brake, and place the engine start/stop button in the OFF position. Take the Key with you when exiting the vehicle.

WARNING

  • Do not depress the accelerator pedal while sitting in the vehicle with the engine running. Depressing the accelerator pedal for a long period of time may cause the engine or exhaust system to overheat and start a fire.
  • The exhaust gas and the exhaust system are very hot . Keep away from the exhaust system components. Do not stop or park over flammable materials, such as dry grass, paper or leaves. They may ignite and cause a fire.

LCD display messages ➤

Good driving practices ➤

Launch Control ➤

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Vacuum Pump

Components and components location Components 3.3 T-GDI LAMBDA II 1. Vacuum pump 2. Vacuum pump bracket 2.0 T-GDI THETA II 1. Vacuum pump 2. Vacuum pump bracket Repair procedures Removal [3.3 T-GDI LAMBDA II] 1. Turn ignition switch OFF and disconnect the negative (-) battery cable.

Kia Stinger (CK) 2018-2023 Owner's Manual: Engine Room Under Cover

Repair procedures Removal and Installation Engine Room Front Under Cover. 1. Remove the engine room front under cover (A). Tightening torque : 7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft) 2. Install in the reverse order of removal. Engine Room Rear Under Cover.

Categories

 
Copyright © 2026 www.kstinger.com 0.0104