Kia Stinger CK: Chassis / Steering Gear Rack, Linkage and Boots

Kia Stinger (CK) 2018-2023 Service Manual / Maintenance / Chassis / Steering Gear Rack, Linkage and Boots

Repair procedures

Inspection

Check the steering wheel free road.

(1)	Turn the steering wheel so that the front wheels are facing straight ahead.

(2)

Measure the distance where the steering wheel can be turned without moving the front wheels.

Standard value: 0 ~ 30mm (1.18in.) or less

(3)	If the play exceeds standard value, inspect the steering column, shaft, and linkages.

Check the steering linkage for looseness or damage.

(1)	Check that the dust parking and cap are not damaged.

(2)	Check that the Bellows bands are not loose.

(3)	Check that the steering gear box is not damaged.

(4)	Check that the column and shaft are properly connected to the steering gear box.

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Door Scuff Trim

Components and components location Component Location 1. Front door scuff trim 2. Rear door scuff trim Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Kia Stinger (CK) 2018-2023 Service Manual: Securing a child restraint seat with “Tether Anchor” system

First secure the child restraint with the LATCH lower anchors or the seat belt. If the child restraint manufacturer recommends that the top tether strap be attached, attach and tighten the top tether strap to the top tether strap anchor. Child restraint hook holders are located on the back of the rear seatbacks. WARNING Take the following precautions when installing the tether strap: Read and follow all installation instructions provided with your child restraint system.

Kia Stinger CK: Chassis / Steering Gear Rack, Linkage and Boots

Repair procedures

Disc Brakes and Pads

Tire (pressure & tread wear)

Other information:

Categories