Kia Stinger: Light bulb position (Side) / Rear turn signal lamp (LED type) bulb replacement

If the rear turn signal lamp (LED) (1), does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an integrated unit. The LED lamps have to be replaced with the unit.
A skilled technician should check or repair the rear turn signal lamp (LED),
for it may damage related parts of the vehicle.
If the rear side marker (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an inte ...
1. Open the liftgate.
2. Open the service cover.
3. Loosen the light assembly retaining screws with a cross-tip screwdriver or
spanner.
4. Remove the rear combination lamp assembly from t ...
Other information:
Components and components location
Components
1. Radiator
2. Radiator upper hose
3. Radiator lower hose
4. Radiator upper mounting bracket (RH)
5. Radiator upper mounting bracket
(LH)
6. Radiator lower mounting insulator (RH)
7. Radiator low ...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged
if the lights are left in the ON position. The system automatically shuts off
the parking lights 30 seconds after the ignition key is removed and the driver’s
door is opened and closed.
...