Kia Stinger CK: Wide Sunroof / Moving Glass

Repair procedures
Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Tilt the moving glass by using the wide sunroof switch.

2.

Remove the both sides mechanism cover (A).

3.

Loosen the mounting screws (A) on both sides.

4.

Carefully lift up the moving glass (A) and then remove it.

5.

Install in the reverse order of removal.

  

After replacing the movable glass, adjust the alignment if needed.

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Front Impact Sensor (FIS)

Description and operation Description • The front impact sensor (FIS) is installed in the Front End Module (FEM). • FIS is a remote sensor that detects acceleration due to a collision at its mounting location. • The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision.

Kia Stinger (CK) 2018-2023 Service Manual: Front Stabilizer Bar

Repair procedures Removal 1. Remove wheel nuts, front wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)    Be careful not to damage the wheel bolts when removing the wheel and tire (A).

Categories

 
Copyright © 2026 www.kstinger.com 0.0079