Other information:
Kia Stinger (CK) 2018-2023 Service Manual: Blower Unit
Components and components location
Components Location
1. Blower Unit
Components
1. Inlet seal
2. Inlet duct case [Upper]
3. Inlet door assembly
4. Inlet case [Lower]
5. Air filter cover
6. Blower case [Upper]
7. Blower case [Lower]
8. Blower motor seal
9.
Kia Stinger (CK) 2018-2023 Service Manual: ECS-G Sensor
Repair procedures
Removal
[Body G Sensor]
Front
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove wheel nuts, wheel and tire (A) from hub.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
Be careful not to damage the wheel bolts when removing the wheel
and tire (A).