Kia Stinger CK: Front Seat Belt / Tail Gate
Kia Stinger (CK) 2018-2023 Service Manual / Front Seat Belt / Tail Gate
Contents:
- Tail Gate Assembly
- Tail Gate Trim
- Tail Gate Latch
- Tail Gate Lift
- Tail Gate Back Panel
- Tail Gate Weatherstrip
Repair procedures
| Adjustment |
| 1. |
After loosening the tailgate hinge (A) mounting bolts, adjust the tailgate by moving it up and down, or right and left. |
| 2. |
Adjust the tailgate height by turning the tailgate overslam bumpers (B). |
| 3. |
After loosening the tailgate striker (C) mounting bolts, adjust the tailgate striker by moving it up and down, or right and left.
|
Tail Gate Assembly ➤
Tail Gate Trim ➤
Tail Gate Latch ➤
Tail Gate Lift ➤
Tail Gate Back Panel ➤
Tail Gate Weatherstrip
Repair procedures
| Replacement |
Do not apply sealant to the body. |
| 1. |
Remove the tailgate weatherstrip (A).
|
| 2. |
Install in the reverse order of removal.
|
Other information:
Kia Stinger (CK) 2018-2023 Service Manual: Front Propeller Shaft
Repair procedures Removal 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the engine room side cover. D 2.2 R VGT (Refer to Engine Mechanical System - "Engine Room Under cover") G 2.0 T-GDI THETA II (Refer to Engine Mechanical System - "Engine Room Under cover") G 3.Components and components location Components 1. Master cylinder 2. Brake booster 3. Brake reservoir Repair procedures Removal [LHD] 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the brake fluid from the master cylinder reservoir with a syringe.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- Tail Gate Assembly
- Tail Gate Trim
- Tail Gate Latch
- Tail Gate Lift
- Tail Gate Back Panel
- Tail Gate Weatherstrip
- New on site
- Most important about car
Contents
Copyright © 2026 www.kstinger.com 0.0099