Kia Stinger CK: Front Seat Belt / Interior Trim

Contents:

Components and components location
Components

1. Front pillar trim
2. Center pillar upper trim
3. Rear pillar trim
4. Cowl side trim
5. Front door scuff trim
6. Rear door scuff trim
7. Center pillar lower trim
8. Front door step trim
9. Rear door step trim

Door Scuff Trim ➤

Cowl Side Trim ➤

Front Pillar Trim ➤

Center Pillar Trim ➤

Rear Pillar Trim ➤

Rear Transverse Trim ➤

Luggage Side Trim ➤

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Power Window Switch

Components and components location Components Driver Power Window Switch Assist Power Window Switch Rear Power Window Switch Schematic diagrams Circuit Diagram Driver Power Window Switch [Front Safety + IMS Type] [Front Safety + Non-IMS Type] Assist Power Window Switch [Door Lock Type] [Non-Door Lock Type] Rear Power Window Switch [Seat Warmer Type] [Non-Seat Warmer Type] Repair procedures Inspection Diagnosis With KDS 1.

Kia Stinger (CK) 2018-2023 Service Manual: Recommended cold tire inflation pressures

All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than 1.6 km (one mile). Recommended pressures must be maintained for the best ride, top vehicle handling, and minimum tire wear. For recommended inflation pressure refer to “Tire and wheels” in chapter 8.

Categories

 
Copyright © 2026 www.kstinger.com 0.0194